------------------ Framework ChangeLog -----------------
EquipmentLib.dll Change Log
=======================================
Last Modified Date: 01 September 2026 5:44:42 AM
Updates: Fixed issue during MP1900a BERT default procedure where the AC Offset setting is not applied, and not turned ON.


GRLSinkTestModule.dll Change Log
=======================================
Last Modified Date: 04 May 2026 5:09:12 AM
Updates: Added Margin Test Settings Tab


GRLBaseFramework.dll Change Log
=======================================
Last Modified Date: 21 December 2025 13:41:22 PM
Updates: build to .net 4.72 allow expired application to load  but disabled report and run fix issue on generate specific test for PDF report for PLL and Tx App


GRLPDFramework.dll Change Log
=======================================
Last Modified Date: 12 January 2026 6:33:20 AM
Updates: Iniital Commit


AppFramework.dll Change Log
=======================================
Last Modified Date: 07 September 2026 13:02:16 PM
Updates: Added OnConnectionChange Event


GRL.Server.dll Change Log
=======================================
Last Modified Date: 12 August 2026 6:33:17 AM
Updates: Update GRLPS logo


------------------ Application ChangeLog -----------------
08-01-2025: update CM calibration setup file for Tektronix Scope.
11-09-2024: implemented preset calibration for Tek scope
28-08-2024: implemented config option to let user select to enable preset calibration (default to false) - beta release
27-08-2024: implement the fixes for bandwidth setting for UXR
            change the connection config the displaying connection diagram
            Fixed the TP2 calibration checking of individual Calibration 
23-07-2024: Added Individual Preset calibration 
06-05-2024: Added Auto Search for new redriver
03-04-2024: Fixed the prompt before linktraining not showing. 
		Fixed the Power Cycle/Reset/Link Training Wait time not waiting correctly before query link training status. 
1.10.30: Fixed the DC test remained run and after Extended Limit failed. And wrongly reported result
1.10.29: Fixed AC wrongly set Fail to Preset test
	 Added New config for Sigtest 4 version 		
1.10.27: Fixed Gen4 preset limit file missing issue
1.10.26: implement the checking for Tx Preset with AC and DC
1.10.40: implement the fixes for bandwidth setting for UXR
1.10.51: Ported uxr triggering fix for response time test from gen4
1.10.52: Added setup files for dual channel KS scope
1.10.54: Optimized test logic for Initial P4 calibration
1.10.58: Fixed AC method for Emphasis cal for Tek ATI 
1.10.59: Beta, Skip link training init and autoscale after 1st preset, autosacle check waveform if need autosacle 
1.10.61: Beta, added CTLE setting with comma separated format.
         Added Auto Search for Vth/CTLE/Delay for PAM4 ED
         Set Rev4 setting prior to Rev5 for Mx18300 
1.10.62: Optimized autoscale checking
1.10.63: Added Final PPG Preset info to Report for Rx Compliance Test
1.10.64: Fixed the Autosearch for PAM4 for Gen5 
	 Added Final User Preset, Cursor,Precurso, PostCursor to report for Rx Test
1.10.65: Added UXR Trigger setting for Tx EQ 
         Optimized Calibration Autoscale
         Remove scope initialization for Rx and Margin Test
1.10.66: Fixed the screenshot issue for Tek scope for DeEmphasis and Preshoot
1.10.67: Fixed the P4 calibration issue. 
1.10.68: Use setting from User Config for P4 Calibration spec limit.
1.10.69: Removed "ParellelSigTestRun" setting from User Config, and set it to True.
1.10.70: Fix the MU196060U redriver setting of CTLE Gain value. 
1.10.71: Fix the TxLEQ preset fall back to DC bug. 
	 Increase resolution of emphasis settings for P4 calibration
1.10.72: Set Sampling Rate for Rj for UxR scope to 256GSample/s
1.10.73: Only Initialize Bert once for TP3 calibration, and check Tx EQ Preset test (DC test)'s SigTest version has been installed
	 Preset EQ Optimization check if optimized Eye larger than Specs, and mark Pass/Fail accordingly. 
	 DM Optimization prompt if user to continue if Preset EQ Optimization failed.
	 Set the ISI Scanning range default to 37, 36, 35, 34, and exit when optimized preset found 
1.10.74: Set the Default Sigtest to 5.1.08
1.10.75: Updated Txresponse scripts to fix issue with new windows utf-8 encoding issue
1.10.76: Showing connection diagram correctly based on SI-ED or PAM4-ED.
	 Added CC/SRIS/SNRS clock architecture support
1.10.78: Rj calibration with 33GHz, 256G Sampling rate for UXR, 3M ui, Sigtest 7 averages.
1.10.79: Added Flex Module detection. 
	 Added ch3 skew setting for Tek Single.
1.10.80: Updated connection diagram's instruction
	 Updated TP2 ISI connection instruction
	 Set the Tp2 Preset start to Default P5.
1.10.82: Fix the connection instruction for ISI loss for CM and DM

